Turn on the input power
(at
Input
＋
) to the CEREBRAL-55.
Input power automatically activates the system.)
The CEREBRAL-55 has entered “
Standby
” status, as shown on the GUI.
(If the GUI screen remains unchanged (blank), it is likely that the com port is incorrect.)
CHAPTER 3 | OPERATING CEREBRAL-55
3.3 GETTING STARTED (SYSTEM CONFIGURATION)
Keep the
Switch
at
Off
to make changes to the output settings.
Refer to the guide printed in the message box,
Follow the relevant steps to change the output setting(s).
Illustrations are available in the appendix.
CEREBRAL-55
operational range
Output configurations
Instructional guide to
change the output
configurations
