3
This manual illustrates instructions for all Spectroline microprocessor-
controlled UV crosslinkers: the Spectrolinker XL-1000 and XL-1500. When we
cite Spectrolinker in the text, it should be understood that we are referring to
both Spectrolinker models.
Please read the instructions in this manual
carefully before using the Spectrolinker UV crosslinkers.
UNPACKING AND INSPECTION
1. Carefully unpack the Spectrolinker and inspect for damage. If any
damage is noted, do not attempt to operate the unit and immediately notify
the carrier and supplier.
2. We recommend that you save your carton and all packing materials to
safely pack and ship the Spectrolinker should it ever require service.
3. The tubes are protected during shipment by foam blocks. Remove them
from the chamber.
4. Connect the power cord provided to the rear panel of the unit.
5. Make sure the Spectrolinker operates correctly by putting it through each
of the OPERATING MODES on pages 5-7.
WARNING
The Spectrolinker was designed exclusively for the purposes described in
this manual. Never use this equipment in any manner not specified in
these instructions because the protection provided by the equipment may
be impaired.
The unit is factory calibrated at 254nm unless the customer specifies
otherwise when ordering. If the user wishes to change the Spectro linker to
a different wavelength (i.e., 312nm or 365nm), the unit should be sent
back to Spectro-UV for recalibration.
The Spectrolinker chamber door is made of a special, transparent
UV-blocking material so that the user can safely observe the operation.
The door has a built-in safety interlock which auto matically shuts off the
UV tubes when the door is not securely closed.
Never use the Spectrolinker
with the safety interlock bypassed.
Moreover, the door seals must be kept
clean, even from cleaner residue. Do not spill any liquid inside the
chamber. When loading samples, take care not to block the photo sensor
located inside the chamber at the rear.
Exposure to ultraviolet irradiation without proper protection can be
hazardous to the eyes and skin.
