SpectraPure®Inc
.
Fax 480.894.6109 Fax us toll-free 1.877.527.7873
E-mail: [email protected] Visit us on the web www.spectrapure.com
5
SpectraPure
®
SYSTEM HOOK-UP:
1. Attach the garden hose adapter
(black tubing)
to your cold water
source. Never run hot water (greater than 100° F (38° C)) through
the
system.
2. Place
the
yellow concentrate (waste) tubing
and the
blue purified
(product) water tubing
into a drain. Do not restrict flow from these
lines.
3. Open the cold water supply valve. You may use pressure up to 80 psi
(5.5
bar).
Check the system to ensure that all fittings are tight and
leak- free before leaving the system unattended. Monitor for
at least 72 hrs.
Note: It is recommended that at least 2 gallons (7.57 liters) of purified
water be discarded now before collecting purified water for use. If the
unit is not used for several days, run the system for at least 10 minutes
before collecting any water. This will flush out any stale water in the
system.
4. Finish the installation by connecting the yellow line to a drain. The
blue line can be placed into a Rubber Maid™ trash can or set up
automatically using a Liquid Level Controllers. (Liquid Level
Controllers and Automatic shut off accessories sold separately.)
If you are setting up your system for the first time or replacing a
membrane, please see the “Checking the Concentrate to Purified Water
Ratio” section on page 6-8 .
SYSTEM INITIALIZATION
