SpectraPure
®
SpectraPure
®
Inc.
480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
7
DRINKING WATER SYSTEMS PLUMBING CONNECTIONS
Each of our Drinking Water Systems (DWS-90, DWS-PP-90, MPDW-90) has 4 water connections. These consist of Tap
Water In, Waste Water Out, Line Out to the Pressurized Storage Tank, and Line Out to the Faucet. See the following
pictures and diagrams for the correct connections for each of the three systems.
On all three of our drinking water systems, the threaded elbow must be attached to the Feed Water IN port of the
sediment filter housing. The threaded fitting is attached to one end of the included 1/4" Black tubing. The Feed Water IN
port is located on the side of the sediment filter housing (the leftmost filter housing when viewed from the front of the
system). Remove the elbow from the tubing and screw it into the IN port on the filter housing. Hand-tighten until the
O-ring contacts the side of the housing. DO NOT OVERTIGHTEN!
COMMON CONNECTIONS
1
1
MPDW-90 CONNECTIONS
TOP REAR VIEW
1/4" BLUE TUBING FROM TEE
FITTING OUT TO TANK
1/4" BLUE TUBING
OUT TO FAUCET
1/4" YELLOW TUBING FROM UNION FITTING AT
END OF RED TUBING OUT TO DRAIN SADDLE
NON-AIR GAP FAUCET
FAUCET
ADAPTER
STEM
ADAPTER
