721-0048-000_B.docx
February 2018
21
Chapter 2:
Designing the Configuration
QNC is used to load wireless settings into the phone so it can associate with the Wireless LAN.
CMS utilizes three levels for parameter settings.
•
Enterprise settings affect all configured phones. Wireless settings are a subset of
Enterprise settings.
•
Group settings affect only those phones that have been assigned to a specific Group.
Not all installations utilize Groups.
•
Device settings affect only a specific phone. All installations have Device settings for
each phone.
This Chapter will identify the parameters normally configured in each level along with some
discussion on variations for certain purposes.
QNC Settings
Wireless and other settings are provisioned through QNC. See Spectralink
Quick Network
Connect Administration Guide
for detailed information about the following settings:
Wi-Fi Setup
WLAN identity
•
SSID
Security parameters fir wireless communication
•
Open network
•
WEP
•
WPA-PSK
•
WPA2-PSK
•
WPA2-Ent
Radio settings
•
Domain (Country)
•
2.4GHz or 5GHz or both
•
Transmit power settings
Server settings
•
CMS Server name or IP
