SpectraLink NetLink SVP Server Installation And Setup Manual Download Page 30 | Manualshive

Page: 30 / 38

SpectraLink NetLink SVP Server Installation And Setup Manual Download Page 30

SpectraLink Corporation

Installation, Setup, and Maintenance

NetLink SVP Server

Part Number: 72-0178-00-J.doc

Page 30

5.2 NetLink Telephony Gateway System

In a NetLink Gateway environment, the addition of an SVP Server is detected as soon as
the new SVP Server is running. The new SVP Server will immediately start providing the
"timing" function for the appropriate Wireless Telephones. The user should not detect
any change. The removal of an SVP Server is detected within one minute. During this
time, any Wireless Telephone that was using the SVP Server that was removed will be
affected. If the Wireless Telephone was not in a call, the Wireless Telephone may lose
contact with its gateway, resulting in a checkout/checkin sequence. If the Wireless
Telephone was in a call, the audio will be lost and the call will be dropped.
There is no master SVP Server in a NetLink Telephony Gateway environment.

«
...
28
29
30
31
32
...
»

Summary of Contents for NetLink SVP Server







































Reviews:

No comments