SpectraLink Corporation
Installation, Setup, and Maintenance
NetLink SVP Server
Part Number: 72-0178-00-J.doc
Page 16
2.8 The Front Panel of the NetLink SVP Server
The NetLink SVP Server’s front panel contains ports to connect to power, the LAN, and
an administrative computer via an RS-232 port. Status LEDs supply information about
the NetLink SVP Server’s functioning.
RS-232
Port – male DB-9 connector (DTE) used for RS-232 connection to a terminal,
terminal emulator, or modem for system administration.
LEDs:
LNKOK
– lit when there is a network connection.
ACT
– lit if there is system activity.
COL
– lit if there are network collisions
.
NETWORK
– connects to wired (Ethernet) LAN.
ERROR
– lit when the system has detected an error.
STATUS
– indicate system error messages and status.
1
– heartbeat, indicates gateway is running.
2
– if active calls.
3, 4
,
5
– currently unused
PWR
(power jack) – connects to the AC adapter supplying power to the system.
Use only the SpectraLink-provided Class II AC Adapter with output
24VDC, 1A.
S
L
N
K
O
K
A
C
T
C
O
L
Status
E
R
R
O
R
3
4
5
1
2
PWR
NETWORK
RS-232