manualshive.com logo in svg

SpectraLink NetLink SVP Server, Installation And Setup Manual, Page: 24 / 38

Share
Download
SpectraLink NetLink SVP Server Installation And Setup Manual Download Page 24

SpectraLink Corporation 

Installation, Setup, and Maintenance 

NetLink SVP Server 

Part Number: 72-0178-00-J.doc 

Page 24 

4.4  SVP Server Configuration 

The 

SVP-II Configuration

 screen is where you set the mode of the NetLink SVP Server. 

It is also where you can lock the NetLink SVP Server for maintenance and reset the 
NetLink SVP Server after maintenance. The type of gateway you are using determines 
the mode of the NetLink SVP Server. For 

SVP-II Mode

, select from either 

NetLink

 for 

systems using the SpectraLink NetLink Telephony Gateway or 

NetLink

 

IP

 for systems 

using an IP telephony server from a third party vendor.  

 

The NetLink SVP Server will automatically lock for maintenance if the IP address is 
changed. When this Maintenance Lock occurs, the NetLink SVP Server must be reset 
upon exit. All active calls are terminated during a reset. 
From the main menu, scroll to 

SVP-II Configuration

 and select by pressing Enter.  

Summary of Contents for NetLink SVP Server







































Reviews:

No comments