Spectralink 7420 and Spectralink 7440 User Guide
14088700 Version 13
September, 2013
9
To Redial:
Redial / CLIP (CLIP = Calling Line Identification Presentation)
1
Press the
<
key (REDIAL) to enter the redial/CLIP stack
2
Scroll to the desired number by using the
<
or
>
keys. Redial numbers are marked with
REDIAL or name. CLIP numbers are marked either with CLIP or the name of the person who
called.
3
Press the
key. The
icon in the display flashes until connection is established.
Using the Handset in Residential Systems: (not on Spectralink DECT Server)
Internal Call Post-dial:
1
Press the
INTkey
. The
icon in the display flashes
2
Dial the number of another handset on the base station. The
icon in the display flashes
until connection is established.
Internal Call Pre-dial:
(not on Spectralink DECT Server and Spectralink IP-DECT Server)
•
Press the number of another handset on the base station. Press the
INTkey
. The
icon in
the display flashes until connection is established.
Answering Calls
When the handset rings, the LED flashes fast and the display shows the CLIP (if presented). If it
is an external call (or if no CLIP) the display shows INCOMING CALL.
•
Press
to answer a call when your handset rings.
You can stop the ring signal without answering the call.
•
Press
√
key (mute) and the ring signal is muted. Display shows: RINGER MUTED.
During Calls
Volume Regulation:
Use the two keys placed on the right side of the handset for volume control.
Note
If the Date and Time function is supported, then date and time of the incoming or outgoing call
is shown in the CLIP/Redial stack on the 4th line of the display. See Chap. Date and Time
Function for more information.
