Spectra® 20K Library Transport Tray Assembly Replacement Guide
35
4.
Place the transport tray so that the power and control ribbon is on the side of the
transport tray facing away from you, and then slide the picker mechanism to the
left. The power and control ribbon should lay flat on the transport tray (Figure 44).
5.
Place a plastic tie (not supplied) through the gear cover and around the robotic
picker (Figure 45). Use multiple ties if necessary.
6.
Carefully tighten the tie(s) until the robotic picker is secured to the transport tray
(Figure 46).
Figure 44
The transport tray with the picker moved all the way to the left.
Figure 45
Use a tie to secure the picker.
Figure 46
Carefully tighten the tie.
Power and control ribbon
