Spectra® 20K Library Transport Tray Assembly Replacement Guide
31
Open the Entry/Exit Port
1.
Select
Toolbars > General
.
2.
Select the
Inventory
icon in the upper left corner of the screen; the Library
Inventory screen displays.
3.
Select
Open/Close
in the Entry/Exit Port
menu (Figure 40).
4.
The Confirm Open Entry/Exit Port window displays; select
OK
.
5.
Insert any bar-coded tape into Slot 1 (the top slot) of the E/E port.
6.
Select
Open/Close
again to close the E/E port.
7.
The Confirm Close Entry/Exit Port window displays; select
OK
.
8.
Wait for the inventory sweep to complete, then verify that the bar code label is
correctly displayed in the Inventory screen.
9.
Leave the tape in the E/E port.
10.
Proceed to
Picker-Slot Calibration
on page 32.
Figure 40
The Library Inventory screen, showing the Entry/Exit Port menu.
