P
OINT
CTRL
V
IRTUAL
R
EALITY
C
ONTROL
D
EVICE
E
DGE
C
ALIBRATION
L
OWER
E
DGE
C
URSOR
Step 9
Return to your reference point in the cockpit
and center it in your field. Now point directly at
the reference point.
Finger and Cursor should line up
Step 10
While keeping your hand in the same location,
move your head slowly upward until the cursor
reaches it limit. Observe if the cursor moved
Above or Below original location.
Move Upper Cursor Up
Move Upper Cursor Down
Advance to Save Settings
26
Note1:
During this phase you can
only adjust the cursors lower
limit. The FCU buttons will
only move the cursor when
the cursor is located on the
lower half of the screen.
Step 11
While keeping your head and hand in
the same stationary position, adjust
the cursor location with the FCU
buttons until it returns to its original
location centered on the MFD.
Press FCU button 3 to save and Exit.
If cursor moved here when
you looked down…
…with out moving you head or
hand ,move cursor back here
by pressing FCU Button 2
Center MFD in FOV
and Point at it
Note 2:
Care must be take to
remember wich of the 3
cursor adjustment you are
making, 1) Left/Rigtht,
2)Upper, or 3) Lower.
