P
OINT
CTRL
V
IRTUAL
R
EALITY
C
ONTROL
D
EVICE
E
DGE
C
ALIBRATION
U
PPER
E
DGE
C
URSOR
Step 6
Return to your reference point in the cockpit
and center it in your field. Now point directly at
the reference point again.
Finger and Cursor should line up
Step 7
While keeping your hand in the same location,
move your head slowly down until the cursor
reaches it movement limit. Observe if the cursor
moves Above or Below original location.
Move Upper Cursor Up
Move Upper Cursor Down
Advance to Next Step
Lower Cursor Edge Alignment
25
Step 8
While keeping your head and hand in
the same stationary position, adjust
the cursor location with the FCU
buttons until it returns to its original
location centered on the MFD.
Press FCU button 3 when done.
If cursor moved here as
head was rotated down…
…with out moving you head or
hand ,move cursor back here
by pressing FCU Button 2
Center MFD in FOV
and Point at it
Note:
During this phase you can
only adjust the cursors upper
limit. The FCU buttons will
only move the cursor when
the cursor is located on the
upper half of the screen.
