9
2. Installation
2.1 Installation
The dome camera is for use in surface or pendant mounting applications, and the mounting
member must be capable of supporting loads of up to 3.5 lb (1.6 kg). (Pendant mounting must use
pendant mount accessory.)
The dome camera’s mounting bracket should be attached to a structural object, such as hard wood,
wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the housing to secure
waterproofing.
2.1.1 Locking Dome Camera
A. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).
B. Fix the Mounting Bracket to the ceiling using supplied Anchors (4x) and Mounting Screws (4x)
(Figure B).
C. Hook up the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).
D. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D).
E. Turn the dome to the counterclockwise about 10 degree to the locked position (Figure E).
Summary of Contents for VIP2PTZ12X
Page 68: ...68 Figure Dimension...
Page 70: ...VIP2PTZ12X IP CAMERA Rev A...
