Speco IP-INTB1, User Manual

Page: 33 / 123

33
IP Camera User
’
s Manual Speco Technologies
After registration of THE CAMERA in Service Server (refer to ‘Use of Service Server’ of ‘ 5.
Basic Use’,
connect to THE CAMERA by Domain Name (Server Name) allocated to THE CAMERA.
For example, run Web Browser and input Domain Name allocated to THE CAMERA in URL. In
http://IPXXXXX.ipcam4u.net, ‘IPXXXXX’ is to be Name of Server registered in Service Server by
user.
If the initial page is shown as [3-8], check Video of THE CAMERA referring to ‘ 2. Install and
Video Check ’. If Video is seen, set up is properly done.
Fig. 3―8 Initial Page of THE CAMERA
3.3. Installation with IP Sharing Device (Router)
1) After checking Video in ‘2. Install and Video Check’ , then go to the next step.
2) Connect THE CAMERA and PC with LAN Cable (Crossover Cable).
3) Cable Connection and Network Setting should be done same as per ‘2. Install and Video