Speco IP-INTB1, User Manual

Page: 112 / 123

112
IP Camera User
’
s Manual Speco Technologies
6. Network Environment
It is required to follow the recommendation of the environment where THE CAMERA will
be
installed or the similar environment
.
6-1. Private line Environment
Usually Company, University, Research center use the leased line. They use many public IP addresses.
In order to install THE CAMERA under this environment, select “Static IP Address” in ‘Static IP Setting’ of
‘3. Basic Setting’ and input IP address, subnet mask and gateway. If there is DHCP server on the network,
select ‘Dynamic IP Address’ in ‘Dynamic IP’ of ‘3. Basic Setting’. You can get all the information (IP
address, subnet mask, gateway, DHCP server) from the network administrator. Sometimes, the THE
CAMERA may not work properly if the user installed firewall for security purpose. In this case, open the
port on the THE CAMERA, then it will work properly. You can check the current port of THE CAMERA
from the “Administrator's Page”->”Network Setting”->”Port Setting” (see ‘ 3. Basic Setting ‘). The default
port is set on ex-factory as follows :
¾
Web Connection Port : Port 80 TCP
¾
Authentication and Control Port : Port 9000 TCP
¾
Video Streaming Port : Port 9001 TCP
¾
Motion Detectin Control Port : Port 9005 TCP
6-2.
Broadband (ADSL, Cable, Fiber Optic) Modem Environment
Home, store, small office use one Broadband modem (DSL, Cable Modem), and use one public IP
address. In order to use several PC through one Public IP address, the user in most cases use IP sharing