13. Mix Outputs
- These balanced ¼" TRS jacks are the
left and right outputs for the stereo master. The signal
present at these jacks is adjusted with Mix Master
level [#1] on the front panel.
14. Mix insert send/return
- The mix master has left
and right balanced ¼" TRS send and return insert jacks
and are active when the insert switch [#2] on the front
panel is enabled. The insert jack provides line level
inter-stage access to the mix bus before (pre) the Mix
Master level control. This means that any device
interfaced to these jacks will not be affected by any
adjustments of the Mix Master control.
15. Monitor outputs A and B
- These balanced ¼" TRS
jacks are available for hooking up a power amp or
power speakers. The signal present at these jacks is
adjusted with the Monitor Master control [#5] and
selected with the monitor A-B select [#6] on the front
panel.
16. 2 track returns #1 and #2
- These balanced ¼" TRS
jacks allow interface of external auxiliary stereo line
level signals. The (M) designation on this jack indicates
that this jack should be used when you have a
monaural source. These inputs are adjusted with the
2 TRK level controls [#11] on the front panel.
17. Solo trim control
- This control adjusts the overall stereo in-place solo listening level to
the monitor and headphone outputs. The adjustment of this control permits the volume of
the soloed signal to match the level of the normal stereo mix.
The rear panel Solo Trim has been factory calibrated and does not need adjustment.
18. DC power inlet
- This connector is used to connect the DC cable from the external
power supply.