6. Aux Send Master
- The 4 Aux Masters provide master level control to the balanced aux
send outputs on the rear panel. When matched with an effects unit that is properly
operated at a professional input level of +4 dBu, the optimum setting for this pot is typically
anywhere from 2 to 3 o'clock.
7. Solo
- When a solo switch is pressed, any adjustment to the Aux Master level control will
be evident in the monitor and headphone playback. A red LED illuminates any time its
associated Solo Switch is enabled.
8. Group Outputs
- These balanced ¼” TRS jacks
are the outputs for groups 1 through 8. The
signal present at these jacks is adjusted with the
group master level control [#1] on the front
panel.
9. Insert Send/Return
- Each group channel has
balanced ¼" TRS send and return insert jacks
and is active when the insert switch [#2] on the
front panel is enabled. The insert jacks provide
line level inter-stage access to the group (pre)
the Group Master level control. This means that
any device interfaced to these jacks will not be
affected by any adjustments of the Group
Master.
The insert jacks may be utilized to connect
processors such as limiters, equalizers, or a
color/character module.
10. Aux Send Outputs
- Each of the 4 aux send
channels have a balanced ¼" TRS jack to
interface to the input of an effects processor.