Speck pumpen Zismatic 40/10 WE, Operation Manual

Page: 36 / 56

Safety
8 EN 06|2019
2.3 Safety regulations
The operator of the system is responsible for the adherence to all
relevant statutory regulations and guidelines.
 Observe the following regulations when using the pump/unit:
– This manual
– Warning and information signs on the product
– The valid national regulations for accident prevention
– The internal occupational, operational and safety
regulations of the operator
2.4 Structural modifications and spare parts
Alterations or modifications can affect operational safety.
 Never modify or alter the pump/unit without the
manufacturer's permission.
 Only use original spare parts and accessories authorised by
the manufacturer.
2.5 Signs
 Ensure that all the signs on the complete pump/unit remain
legible.
2.6 Residual risk
2.6.1 Falling parts
 Attach the pump unit to both hooks.
 Only use hoisting and load-bearing equipment which is
suitable and technically sound.
 Do not stand under suspended loads.
2.6.2 Rotating parts
There is a risk of shearing and crushing due to exposed rotating
parts.
 Only perform servicing when the pump/unit is not in
operation.
 Prior to servicing, ensure the pump/unit cannot be switched
back on.
 Immediately after finishing servicing, reattach or reactivate all
protective equipment.