13
13
2. safety
This operation manual contains basic instructions, which must be observed dur-
ing installation, operation and maintenance. Therefore the operation manual
should be read carefully by the person in charge of the installation as well as by
all other technical personnel/operators before installation and start-up. It should
be available on site at all times.
It is important that not only all general safety measures under the above head-
ing “Safety” are adhered to, but also all other specified safety instructions men-
tioned under the other headings, e.g. for privat use.
2.1 symbols for safety instructions in the operation manual
All safety warnings contained in the operation manual which, when ignored may
constitute danger for humans, are specially marked with the general danger
symbol:
Safety symbol according to DIN 4844 - W 9
Electrical hazards are specially marked with the symbol:
Safety symbol according to DIN 4844 - W 8
For safety warnings which, when ignored may constitute a hazard for the ma-
chine and its functions, the word
is added.
Symbols directly attached to the machine for example,
– arrow denoting the direction of rotation
– symbol for fluid connections
must be heeded and kept fully legible at all times.
2.2 Personnel qualification and training
All personnel for the operation, maintenance, inspection and installation must
be fully qualified to perform that type of job. Responsibility, competence and
the supervision of such personnel must be strictly regulated by the user. Should
the available personnel be lacking the necessary qualification, they must be
caUtIon
