User Manual e-Mobby
Revision: 1.0
Page 26 of 30
Date of release: 2019-02-14
UM0002-EN_e-Mobby 2_1.0.docx
CAUTION:
Wait at least
20 minutes
before resetting the thermal fuse to make sure the drive
motors are cooled down properly.
CAUTION:
Normally this problem only occurs in very rare cases. Please contact your service
technician or local representative in case this problem occurs frequently to avoid severe
damage to the drive system.
5.6 Signal protection
The e-Mobby has a dedicated pole for visual and audible signals for alerting bystanders. These signal
indicators are protected by a fuse, located at position K (see §3.1). If these functions do not work, first
check the fuse and if required, replace it with a new one or contact the service technician.
NOTE:
If replacing the fuse does not solve the problem, please contact the service technician
or your local reseller.
6. Disposal
The e-Mobby contains many materials and substances which can be harmful for people and the
environment. It should be taken care of once disposed.
The e-Mobby is marked with the following symbol:
Follow the local regulations regarding the disposal of the e-Mobby, containing electronic parts.
NOTE:
Dismantle instructions are available upon request, please contact Special Mobility BV or
your local reseller.
