User Manual e-Mobby
Revision: 1.0
Page 25 of 30
Date of release: 2019-02-14
UM0002-EN_e-Mobby 2_1.0.docx
WARNING:
Never park the e-Mobby with released brakes on a slope or comparable surface. The
vehicle may roll down the slope and cause serious injury to bystanders.
CAUTION:
Overriding the brake function disables the brake functionality in general. After manually
moving the e-Mobby, make sure the brakes are activated again!
5.5 Thermal protection
It may accour that the drive motors are getting too hot. To prevent the motors from overheating, a
thermal fuse is installed. If this fuse is activated, driving is blocked and a pin shows up at position J (see
§3.1).
To reset this fuse, push the pin inwards and check if it stays in place. If not, the motors are still
overheated. Wait for a while and try again. If this state persists, please contact the service technician or
local sales representative.
Rotate left
lever 90°
clockwise
Normal position,
lever in drive
direction
Rotate right
lever 90°
counter
clockwise
