background image

User Manual 

Atlas™ Lightweight Evacuable Pellet Dies  
P/N’s GS25410 and GS25411

 

 

 

CONTENTS

 

 

1.

 INTRODUCTION

 ................................................................................. 5 

2.

 UNPACKING AND CHECKLIST

 .............................................................. 6 

3.

 SAFETY AND DIE CARE

 ....................................................................... 8 

4.

 PREPARING THE DIE FOR USE

 ............................................................. 7 

5.

 FILLING THE DIE WITH SAMPLE

 .......................................................... 11 

6.

 MAKING THE PELLET

 ........................................................................ 12 

7.

 REMOVING THE PELLET FROM THE DIE

 .............................................. 13 

8.

 CLEANING AND STORAGE OF THE DIE

 ................................................ 14 

9.

 LEGEND FOR THE LIGHTWEIGHT DIE

 .................................................. 14 

10.

 SPARE PARTS FOR THE LIGHTWEIGHT DIE

 ....................................... 15 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

© December 2017 Specac Ltd.  All rights reserved. 

 

Brilliant Spectroscopy is a trademark of Specac Ltd.   

Other product names mentioned herein may be trademarks  

of their respective owners. 

Summary of Contents for Atlas Lightweight Evacuable Pellet Die



















Reviews: