Spearhead TWIGA
20
20.
Adjust top link length until the main
frame is vertical.
Warning
Avoid raising the tractor linkage once the stabiliser bars are locked
in place.
Always lower the tractor linkage and allow all the weight to be
carried by the stabiliser frame. Failure to observe this warning will
result in bending the stabiliser yoke.
21.
Warning
- fully tighten check chains or
linkage stabilisers to hold the machine rigid.
There must be no sideways movement, it is
very dangerous and may cause damage.
22.
Raise parking stands and secure with
locking pin. The machine can not be unhitched
without these stands.
23.
Use only tractors with safety glass. If windows
are not laminated safety glass, polycarbonate
glazing must be fitted between operator and cab
meshing. Shape mesh to cover all windows that the
driver will look through to view flail head in any
operating position. Mesh can be retained by
springs and clips supplied, but it is the operators
responsibility to ensure guarding is firmly in place.
Summary of Contents for Twiga 555
Page 28: ...Spearhead TWIGA 27...
Page 63: ...Spearhead TWIGA 62...
