Spearhead TWIGA
47
Technical Data & Description
Each shaft is driven by vee belts, and the whole unit is powered by a hydraulic motor.
Branch carriers are placed between the blades.
The Quad saw is supplied with a special bracket enabling mounting on various
vehicles and machines.
Belt Diagram - Quad Saw
It is important that the belts are correctly mounted and tightened. When new belts
are mounted they must be tensioned correct. See LRS Manual for further
information.
After 10 to 15 working hours the belts may have slackened and must be checked.
Mounting the Quad Saw
The blades must be mounted in a downward cut rotation (Fig. 1). Always use the
blades vertically positioned in relation to the direction of travel (Fig. 2).
The hydraulic hoses must be connected correctly to achieve the correct direction of
rotation. Drainage hose must be lead directly to the oil reservoir. Daily inspect all
hydraulic hoses and fittings for damage or leaks.
When starting for the first time the speed of rotation on the blades must be
measured. This rotation should be maintained to ensure optimum performance.
Summary of Contents for Twiga 555
Page 28: ...Spearhead TWIGA 27...
Page 63: ...Spearhead TWIGA 62...
