8999118EN: v1.1 21/12/2020
34
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
7.4
Machine Inspection Record
MACHINE INSPECTION
RECORD
(For Rolliflail 150/180/210)
Pre-delivery inspection:
Select
Installation inspection:
Select
Daily pre-work inspection:
Select
Model:
Serial No:
Inspector name (print):
Inspection date:
Company/Position:
Inspector signature:
Visual Checks
Comments
OK
Check that an operator’s instruction manual in the correct
language for the working territory is in the machine document
holder.
Check that the serial number printed on the parts manual supplied
with the machine matches the serial number of the machine.
Warning decals are present, clean and in good order
Check main cowl and headstock for any structural problems
Review the condition of the roller bearings and replace if
necessary
Look for any evidence of gearbox oil leaks
View the rotor shaft for any missing or excessively worn flails
Review all the guards fitted to the machine and tractor, check with
the instruction book if unsure.
If fitted, check that the mulching bar is in good order.
Review the PTO shaft guard to be in sound condition.
If fitted, Check hoses for damage, Kinks, twists, chafing or
weeping.
Check that the prime mover is equipped to supply the correct rpm
at the Power Take-Off shaft
Mechanical Checks
Comments
OK
All mounting fasteners to tractor need to be checked for tightness
and integrity. This may require the machine being taken off the
tractor to do this.
Review the security and tightness of the main pivot pins and
replace any missing securing pins.
Check the condition and tension of the drive belts
If fitted, check the security of any hose fittings for tightness
Check the tightness of the flail fasteners by tightening
– do not
undo as locknuts may loosen.
Check the tightness of the gearbox mounting fasteners
Ensure gearbox oil is to the level plug.
Check the PTO shaft bearing for any wear. Remove the shaft if
necessary.
Check tightness and condition of the side skids.
Check and adjust tractor tyre pressure. See tractor instruction
book.
Inspect blade bolts for condition and tightness again
st operator’s
manual torque values
Ensure that the blades are free-swinging
