8999118EN: v1.1 21/12/2020
26
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
5
Gearbox Oils And Grease
5.1
Filling The Gearbox
The gearbox capacity is 1 litre. Always check the oil level before use and top up if necessary, see maintenance
section. Use oils compatible with classification SAE 90EP (ISO VG 220, AGMA 5EP).
5.2
Greasing Points
See greasing locations in Figure 5.1. Use grease classification DIN 51825 (KP 2 K) or a good quality lithium
based grease.
NOTE:
The illustrations show the Rolliflail 210 with cross-shaft and belt guarding removed. The same routine
greasing requirements apply to the Rolliflail 150 and Rolliflail 180.
In order to access all grease points, the cross-shaft guard and belt guard will need to be removed.
NOTE:
These illustrations show the Rolliflail 210 with cross-shaft and belt guarding removed. The same routine
greasing requirements apply to the Rolliflail 150 and Rolliflail 180.
Figure 5.1
Rotor shaft
greasing
point
Roller
greasing
point
Cross-shaft
greasing
point
Rotor shaft
greasing
point
Rotor shaft
bearing
greasing
point
Rotor shaft
bearing
greasing
point
Roller
greasing
point
Cross-shaft
greasing
point
