Spearhead Rollicut
500 & 600
28
Cutting Height
The Rollicut roller mower is fitted with rollers front and rear of the mowing body.
The height off these rollers are used to adjust the cut height of the machine. The
rollers and skid combination makes the cutting operation very safe as the blades are
all enclosed.
To adjust the cutting height of the machine, first the locking nut (A) must be
loosened, there are 4 of the locking bolts, one on each corner.
To then adjust the height the adjuster bolt (B) must be turned clockwise to raise the
height of cut. Every complete turn will raise the cut height by 5mm.
The cut height of the body can be varied from 10mm to 120mm. when the selected
cut height is reached the locking bolts (A) should be retightened.
B
A
