Spearhead Rollicut
500 & 600
17
Shortening the Input PTO Shaft
Before fitting the PTO for the first time, it may be necessary to adjust the length.
There should be maximum engagement of the sliding tubes without bottoming at the
shortest operation position.
To check, first connect the mower to the tractor.
Pull the PTO shafts next to each other in the shortest working position. If necessary,
shorten the inner and outer guard tubes equally (
Fig 1
).
Shorten the inner and outer sliding profiles by the same length as the guard tubes.
File all sharp edges and remove burrs and Grease sliding profiles.
