8999153EN: v1.0 18/12/2020
27
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 4.13
Figure 4.14
4.3
Running The Machine For The First Time
WARNING!
Ensure that the machine and the P.T.O. shaft have been correctly connected to the
tractor. For further information; see Section 4.2.
WARNING!
Ensure that the immediate surroundings will not cause a restriction to the run-up and
checking of the machine.
WARNING!
Ensure there are no children, bystanders or animals in the immediate area when the
machine is run for the first time.
After the machine has been attached to the tractor for the first time, it should be tested to ensure it operates
correctly, before putting it to work.
Use the following procedure when running the machine for the first time.
Lower the machine so the skids are resting on the ground, and the machine is level.
With the tractor at low revs, gently engage the P.T.O. until the machine is running.
Carefully increase the P.T.O. speed to 540 rpm.
Check that the machine runs smoothly and without vibration.
Raise the machine to the transport position.
Check again that the machine runs smoothly and without vibration.
Lower the machine to ground level again.
Gently reduce the tractor revs to idle, and disengage the P.T.O.
Apply the parking brake and stop the tractor.
If any faults are identified; refer to Section 7. If a solution is still not found, consult your local Spearhead
Machinery dealer for assistance.
