Spearhead AGRICUT
240 Offset
23
Machine Dis-connection and Storage
Disconnecting the Machine
Disconnection of the machine is the reversal of the attachment procedure
– refer to
the attachment sections for details.
There is an increased risk of injury when disconnecting the
machine from the tractor. Before attempting to disconnect the
machine, make sure that:
o
The machine is placed on a firm and level surface.
o
The tractor cannot roll after being disconnected.
o
The tractor has stopped, the parking brake is applied and the starter key is
removed.
o
The machine has come to a complete stop before commencing work.
o
Bystanders are kept at a safe distance from the machine and tractor.
o
Before leaving the machine ensure it is left in a safe condition.
o
Do not allow children to play on or near the machine, even when it is
disconnected; there are moveable components on the machine that can
risk injury.
Machine Storage
At the end of the season the machine should be readied for winter storage. The
storage location is ideally in a dry well ventilated building that will offer the machine
protection from the elements. Before placing the machine into storage the following
tasks should be performed;
o
Clean the machine thoroughly.
o
Check that the machine’s safety equipment is not worn or damaged – replace if
required.
o
Check and lubricate the PTO shaft and store it in a safe dry environment to
avoid risk of damage or corrosion.
o
Repair or replace any damaged components.
o
Check and tighten all bolts.
o
Lubricate the machine following the lubrication program.
o
Repair any paint damage and replace any missing decals.
When storing or parking the machine always ensure it is left in a safe position without
risk of harm or injury to persons or animals, if necessary use suitable props or blocks
to support the machine.