Spearhead AGRICUT
240 Offset
20
Attaching the Machine
Attachment of the machine should be performed on a firm level site
– the procedure
for attachment is as follows;
NOTE: Adjust and attach the Left Hand Lift Arm by using the tractor Levelling Box if
necessary.
Remove the top link pin (1) and the two
CAT II pins (2&3).
Reverse the tractor slowly up to the
machine
– adjust the lift arm to align with
the pin holes. Turn off the tractor, apply the
parking brake and remove the starter key.
Attach the lower link arms to the machine
using CAT II pins supplied and secure with
lock pins.
Attach the tractor top link to the single hole
in the top of the headstock using the top
link pin provided with lock pin.
Start the tractor and raise the machine on
the lift arms until the gearbox PTO shaft of
the machine and the tractor PTO are at
their shortest distance apart. Turn off the
tractor, apply parking brake and remove
the starter key.
Adjust the tractor stabiliser chains/bars to
remove any lateral movement when the
machine is in the raised position.
