8999124EN: v2.0 27/10/2021
27
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
4.2
Machine Settings
A number of adjustments can be made on the Mulcher to help the operator in the various working conditions that
may arise.
DANGER!
All adjustments must be made with the machine switched
off, the parking brake engaged
and the PTO disabled.
4.2.1
Adjustment Of The Skids And Roller
Adjust the position of the skids so that the teeth do not come out of the plane made by the two skids. In this way,
even if there are irregularities in the ground, the teeth will not penetrate the ground itself. It is important to check
that the Mulcher is perfectly parallel to the ground in order to obtain perfect operation.
Place the machine on a level surface with two spacers of approx. 12 cm set inside the machine at the
rotor ends. Brake the tractor, switch it off and remove the keys from the dashboard.
Remove the bolts (D), see Figure 10.
Adjust the position on the skid (E) taking care to move it by the same amount, both in front and at the
back.
Reassemble bolts (D) and tighten them.
Perform the same operation for the opposite skid.
Start up the tractor and move the machine.
Figure 10
