8999124EN: v2.0 27/10/2021
10
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Data on the Spearhead manufacturer’s plate should always be referred to when requesting assistance and/or
requiring replacement spare parts.
This data can identify the machine and its characteristics and specification for its particular time of manufacture,
certifying that it responds to current regulations. For this reason the plate should never therefore be removed nor
be used for other purposes; if the machine is dismantled, it should be destroyed to prevent any form of abuse.
By utilising a smart phone and scanning the Authorised Representative QR scan code found on the right-hand
side of the serial plate (ref 8, Figure 2) using a suitable QR scanning App, you can find details for Spearhead
Machinery authorised representatives for its various territories.
1.4
Technical Data
Model
Working Width
(cm)
Minimum
Tractor HP
Requirement
Number of
Teeth
Weight (kg)
Dimensions
(W x L x H) cm
Destroyer Flail
200F
190
80
60
1150
234 x 112 x112
Table 2
Hitch to the tractor
3-point universal
Hitch category
CAT 1-2
PTO input speed
540/1000 rpm
Primary transmission
Input Shaft
Secondary transmission
Belts
Cut height adjustment
Mechanical
Minimum tractor weight
See Section 4.6
1.5
Sound Level
The air noise level created by the Mulcher under operating conditions was detected using a sound level meter
with integrator.
The measurements were carried out at the operator station with the Mulcher activated empty. Tests performed
under the conditions indicated by the standard produced the following results:
Tractor with open cab:
Equivalent weighted sound pressure average level: LpAm = 80.7 dB(A).
Tractor with closed cab:
Equivalent weighted sound pressure average level: LpAm = 78.8 dB(A).
-Sound power level: LwA = 107.1 dB(A).
