11
www.spearandjackson-power.com
AFTER SALES SUPPORT
01904 727505
MAINTENANCE
WARNING! DANGER OF ELECTRIC SHOCK!
Unplug the charger from the mains before carrying
out any cleaning of the appliance.
Cleaning of the window vacuum cleaner
i. Always keep the device clean, dry and free of oil or grease.
ii. Avoid getting the electrical part of the appliance wet or come
in contact with any liquid.
iii. Press the ON/OFF switch to turn off the appliance.
iv. Turn the suction head anticlockwise 90° and remove it from
the appliance.
v. Clean the suction nozzle under running water (not dishwasher
safe).
CAUTION!
The appliance contains electrical components. Do
not clean this under running water!
vi. Remove the Micro-fibre wiping pad from the wiping
attachment and rinse it under running water. The Micro-fibre
wiping pad can also be washed in the washing machine at a
temperature of up to 60°C (without the use of fabric softeners).
vii. Let the cleaned appliance dry prior to assembly.
viii. Use a cloth to clean the housing. Never use petrol, solvents or
cleaning agents that might damage or dissolve plastic.
UK plug
If you need to replace the fitted plug, then this must be
replaced using a BS1363/A Mains plug fitted with a BS1362
approved fuse of identical value to the original fuse. Proceed
as follows:
IMPORTANT
: The wires in the mains lead are coloured in
accordance with the following code:
Blue – Neutral, Brown – Live
In case the colours of the wires in the mains lead don’t match
the colour marking on the terminals, please proceed as
follow.
Connect the blue wire to the terminal marked N (Neutral) or
coloured black. The brown wire must be connected to the
terminal marked L or coloured red.
