Spear & Jackson S4037CR Original Instruction Manual Download Page 12

AFTER SALES HELPLINE

 

03456 052 068

12

• Keep all nuts, bolts and 

screws tight to be sure the 
machine is in safe working 
condition.

• Check the grass collector 

frequently for wear or 
deterioration.

• On machines with multi 

blades, take care as rotating 
one blade can cause other 
blades to rotate.

• Be careful during adjustment 

of the machine to prevent 
entrapment of the fingers 
between moving blades and 
fixed parts of the machine.

• Always allow the machine to 

cool down before storing.

• When servicing the blades 

be aware that, even 
though the power source is 
switched off, the blades can 
still be moved.

• Replace worn or damaged 

parts for safety. Use only 
genuine replacement parts 
and accessories.

SERVICE

• Have your machine repaired 

by an authorized service 
agent. This machine is 
manufactured in accordance 

SAFETY INFORMATION

MAINTENANCE AND STORAGE SAFETY

INTENDED USE

This lawnmower is designed 
for domestic use only:

• This cordless lawnmower is 

intended for mowing lawns 
in domestic and hobby 
gardens.

• This product is not to 

be used in wet weather 
conditions and may not 
be used to mow wet or 
unusually high grass, e. 
g. pasture grass or for 
shredding leaves.

• This product is intended for 

private domestic use only, 
not for any commercial trade 
use. It must not be used for 
any purposes other than 
those described. Any use of 
the machine that deviates 
from its intended use and is 
not included in these.

with the relevant safety 
regulations. To avoid 
danger, equipment must 
only be repaired by qualified 
technicians.

• Only use parts and 

accessories made for 
this machine by the 
manufacturer. Failure to do 
so can result in personal 
injury.

Summary of Contents for S4037CR





























Reviews: