AFTER SALES SUPPORT
0345 605 2070
25
MAINTENAINCE
1. Clean machine body
Clean the machine U handle safety guard
and handle pole,some covers after
Working,care some necessary parts with
clean cloth,extend the life of product.
2. Check engine lubricant level before each use:
1) Separate the attachment from the power
head.
2) Set power head on a flat level surface
with shaft parallel to surface.
3) Unscrew the oil cap and remove.
4) Lubricant level should fall within the top of
oil fill hole (the top of screw thread).
5) If level is low, add engine lubricant until
the fluid level rises to the top of oil fill hole
(the top of screw thread) and does not
overfill.
6) Replace and tighten the oil cap.
NOTICE: Do not overfill. Overfilling the
crankcase may cause excessive smoke, oil
loss, and engine damage.
MAX
