18
AFTER SALES SUPPORT
0345 605 2070
1. Add engine lubricant oil: Initial use
1) Set the unit on a flat surface.
2) Remove the oil cap from the machine
3) Pour 60ml 4 stroke garden engine oil into
lubricant bottle.
4) Add lubricant oil from the bottle into the
lubricant oil tank.
5) Screw and tighten the oil cap.
WARNING:
OVERFILLING THE CRANKCASE MAY
CAUSE SERIOUS PERSONAL INJURY.
Check the oil level before each use. The
importance of maintaining the proper oil level
cannot be overemphasized. Change the oil
according to the Maintenance Schedule.
Use 4 stroke garden engine oil. DO NOT use
dirty oil. Failure to use clean oil of the correct
type can cause premature engine wear and
failure.
2. Fueling
1) Remove the fuel tank cap by turning
counterclockwise. Rest the cap on a
clean surface.
2) Carefully pour fuel into the tank. Avoid
spillage.
3) Immediately replace fuel cap and hand
tighten by turning it clockwise.
4) Wipe up any spilled fuel.
The use of old fuel is the most common
cause of performance problems. Use only
fresh, clean unleaded gasoline.
NOTE: This unit has a 4-stroke engine. DO
NOT mix oil with petrol.
PREPARE
