16
AFTER SALES SUPPORT
0345 605 2070
1
2
OPERATE
Squeeze throttle to start cutting
Squeeze the throttle lockout 1 firstly, then press
2 to make the choke button come back to the
run position. And engine will run.
Note: the choke button will automatically come
back to the run position while you squeezing
the throttle trigger.
If the engine does not run, please repeat above
steps.
Allow the engine to run for 10 seconds and now
you can use the machine.
6
Hold the machine
Always use both hands to hold the machine
with protection gloves. Hold the machine in front
of your body. Make sure that your hands and
feet do not come near the cutting attachment
when the engine is running.
Notice:Hold the product firmly so that it sits with
a gap between the product and your right side.
Stand upright, do not lean forward and pay
attention to posture. Keep both feet apart to
help retain your balance.
5
To restart a warm engine:
Press the on/off switch, Quickly pull the recoil starter
handle until the engine runs.
Hold the body of the machine on the ground using
your left hand (CAUTION! Not with your foot!). Grip
the starter handle, slowly pull out the cord with your
right hand until you feel some resistance (the starter
pawls grip), now quickly and powerfully pull the cord.
Never twist the starter cord around your hand.
Summary of Contents for S2655HP
Page 29: ......
