SpeakerCraft TIME One Owner'S Manual Download Page 12

LIT76000(rev3)

TIME Controller

Dimensions:       

W 17” x H 2” x D 6”

                            

(431.8mm x 50.8mm x 152.4mm)

Rack Mount:       

W 19” x H 2” x D 6”

                             

(482.6mm x 50.8mm x 152.4mm)

940 Columbia Ave., Riverside CA  92507
USA (800) 448 0976  Fax (951) 787 8747   
Interna1 951 787 0543 | www.speakercraft.com

SPECIFICATIONS

Limited Two-Year Warranty

SpeakerCraft Inc. warrants to the original retail purchaser only that 
this  SpeakerCraft  product  will  be  free  from  defects  in  materials 
and workmanship for a period of two years, provided the product 
was purchased from a SpeakerCraft Authorized Dealer. Defective 
products  must  be  shipped,  together  with  proof  of  purchase, 
prepaid  insured  to  the  SpeakerCraft  Authorized  Dealer  from 
whom they were purchased, or to the SpeakerCraft factory at the 
address listed on this installation instruction manual.  Freight collect 
shipments will be refused.  It is preferable to ship this product in the 
original shipping container to lessen the chance of transit damage.  
In any case, the risk or loss or damage in transit is to be borne by 
the purchaser.  If upon examination at the Factory or SpeakerCraft 
Authorized  Dealer  it  is  determined  that  the  unit  was  defective  in 
materials or workmanship at any time during this warranty period, 
SpeakerCraft  or  the  SpeakerCraft  Authorized  Dealer  will,  at  its 
option,  repair  or  replace  this  product  at  no  additional  charge, 
except as set forth below.  If this model is no longer available and 
can not be repaired effectively, SpeakerCraft, at its sole option may 
replace  the  unit  with  a  current  model  of  equal  or  greater  value.  
In  some  cases  where  a  new  model  is  substituted,  a  modification 
to  the  mounting  surface  may  be  required.    If  mounting  surface 
modification  is  required,  SpeakerCraft  assumes  no  responsibility 
or  liability  for  such  modification.    All  replaced  parts  and  product 
become  the  property  of  SpeakerCraft  Inc.    Products  replaced  or 
repaired  under  this  warranty  will  be  returned  to  the  original  retail 
purchaser, within a reasonable time, freight prepaid. This warranty 

does  not  include  service  or  parts  to  repair  damage  caused 
by  accident,  disaster,  misuse,  abuse,  negligence,  inadequate 
packing or shipping procedures, commercial use, voltage inputs 
in  excess  of  the  rated  maximum  of  the  unit,  or  service,  repair  or 
modification  of  the  product  which  has  not  been  authorized  or 
approved  by  SpeakerCraft.    This  warranty  also  excludes  normal 
cosmetic deterioration caused  by  environmental conditions. This 
warranty will be void if the Serial number on the product has been 
removed, tampered with or defaced. This warranty is in lieu of all 
other expressed warranties.  If the product is defective in materials 
or workmanship as warranted above, the purchaser’s sole remedy 
shall  be  repair  or  replacement  as  provided  above.    In  no  event 
will  SpeakerCraft  be  liable  for  any  incidental  or  consequential 
damages  arising  out  of  the  use  or  inability  to  use  the  product, 
even if SpeakerCraft Inc. or a SpeakerCraft Inc. Authorized Dealer 
has  been  advised  of  the  possibility  of  such  damages,  or  for  any 
claim by any other party.  Some states do not allow the exclusion 
or  limitation  of  consequential  damages,  so  the  above  limitation 
and exclusion may not apply. All implied 
warranties  on  the  product  are  limited  to 
the  duration  of  this  expressed  warranty.  
Some  states  do  not  allow  limitation  on 
the length of an implied Warranty.  If the 
original retail purchaser resides in such a 
state, this limitation does not apply.

Summary of Contents for TIME One













Reviews: