67
SE 708 iCS Deskstation User Guide
Quiet Office
Quiet Office when enabled sends all voice service audio to a handset /
headset when one is attached.
To enable quiet office:
1. Press
i
to display the intercom screen.
2. Press
OK
to display the
Main
menu.
3.
Press ► (navigation key) twice to display the
Settings
menu.
4. Ensure
Speaker Settings
is highlighted and press
OK
.
This displays the Speaker Settings which are described below.
5.
Using the ▲ and ▼ (navigation keys) highlight
Quite Office Mode
.
6.
Press ► (navigation key) once to change
OFF
to
ON
.
7. Press
OK
to save the changes.
Global Muting
Global muting is a muting function applied on
lines and can only be set through iManager. It
is applicable to hoots and ARD and MRD calls.
It is best described using an example. Take, for
example, a speaker channel that is monitored by
several local and remote SE 708 units. If a local
SE 708 changes the channel state from monitor
to talk the speaker channel is muted on the other
local SE 708s. Remote units are still able monitor
the same speaker channel. The scenario illustration
located on the right helps to make this clearer. The
illustration shows two sites monitoring Channel A.
Site A is the local site, and Site B the remote site.
Contact your System Administrator for more information on Global Muting.
