SPC 8150N, User Manual

Page: 15 / 28

15
EN
the other end to the audio output of the player (MP3,
others).
NOTE: If there are inserted a memory card and a U-disk at the
same time, the unit only plays music from the last source, which
was inserted. However, if you are going to connect an audio device
(MP3 player, etc.) to the FM transmitter through the audio interface
(9), make sure to disconnect other sources to make the audio do
not mix to each other. From this moment, the control will be made
from the external audio device and not from the FM transmitter.
Then, when the external audio device is being disconnected, the
transmitter come back to take the control.
- Select the FM frequency transmission:
In Stand-by, the FMtransmissor shows always the used
frequency in the display. When the CH key (1) is pressed,
the display blinks (frequency mode) and then you will be
able to change the frequency. After some seconds, the
display information will be shown fix (song mode), and
so you will be able to select the song you desire. With
each keystroke of the CH key (1) , the transmissor will
shift from song mode to frequency mode, and viceversa.