GB
12
2.6.2 INSTALLATION OF QUADRA INSIDE
1. The air inlet and air outlet panel can be removed to facilitate installation.
2. Place the ebios insert inside the ready-prepared interior of the furniture
unit and level it up.
3. Screw the fire insert on to the furniture side panel, working from the
bottom of the housing interior. Three fastening holes are provided at
each side for this purpose (Fig. 6). Use suitable screws.
4. Fit the front panels in place.
5. Slot the Quadra Inside into the ready-prepared cut-out in the fire cham-
ber of the fire insert.
6. Here’s how to open the housing cover:
Fig. 4
Minimum dimensions/distances for custom-made furniture
A - ebios insert
B - Furniture
Fig. 5
Example of custom-made fireplace (fireplace casing)
-Top view-
-Top view-
min.
25
755 (Cut-out)
-Side view-
-Side view-
min. 30
min.
15
max. 30
528 (Cut-out)
min. 30
max. 25
min.
15
Fig. 6
Mounting
bores
min. 30
min.
15
