USER’S MANUAL
EN
11
7.1 PROPER COOLING
The unit should be placed stable on a dry and flat surface. Avoid too much slope and slippery
surfaces. Check regularly that the vents (inlet, outlet) are not covered. The minimum distance
between the machine vents and walls should be 50 [cm].
7.2 MOVEMENT AND HANDLING
Please take special care when moving the machine. It should be moved by using of specially
installed transport handle.
If transport handle are damaged, then it needs to be repaired at an authorized service center.
7.3 DESCRIPTION OF CONSTRUCTION
1
Transport handle
2
Control panel
3
Socket SK „+”
4
Plasma torch socket („-”)
5
CNC socket
6
Toggle switch ON/OFF
7
Power cable
8
Compressed air inlet
2
3
4
5
6
1
8
7
