20
DOOR ASSEMBLY - SPARE PARTS.
ROBAX 4MM CERAMIC GLASS.
USE ONLY AS PER MANUFACTURERS STANDARD AND SPARE PARTS.
Caution
:
Never close the air lever of the air control completely
or before the fire has started to burn efficiently as
it will create smoke and the fire would be inefficient
and the energy from the wood is wasted.The door
should be closed during operation.
Please follow the instructions in the manual to get the
best results from your module.
WARNING!!!
HOT GLASS – WILL CAUSE BURNS.
DO NOT TOUCH GLASS UNTIL COOLED
NEVER!!! ALLOW CHILDREN TO TOUCH THE GLASS.
PLEASE NOTE
The tool that has been provided is for the
operation of the air control lever and for
opening and closing the wood stove door.
WARNING!
If this tool is not used there is a risk of BURNS.
A - Air supply open:
(when lighting the fire or
adding new wood). The
control lever is pushed
completely to the right. The
firebox will now receive the
maximum volume of com-
bustion air and secondary
air.
B - Controlled burning:
Control lever approx. 20
mm further than the closed air supply position. This
ensures that the fire does not receive too much air and
the wood does not burn too quickly. The secondary air
flows over the panel ventilation system to the ceramic
glass panel and prevents, as far as
possible, any sooting of the glass panel.
C - Air supply closed:
Control lever in the limit position of the 20 mm wide
spacer. The firebox receives no combustion air in this
setting.
WARNING
The combustion-air damper should NOT be altered for
increased firing for any reason!
WARNING
DO NO SHUT OFF THE COMBUSTION AIR OFF
WHILE THE FIRE IS BRUNING OR WHILE THERE ARE
STILL GLOWING COALS IN THE FIREBOX!
Summary of Contents for STOVE-600
Page 26: ...26 10 6 FOR YOUR INFORMATION...
