LIMB SAW SET UP AND OPERATION
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS
(pages
3-5 of
this manual)
BEFORE BEGINNING ANY LIMB SAW OPERATION.
DANGER
Failure to obey the following procedures will result in death or serious injury.
•
Never use your Limb Saw near power lines or electrical extension cords.
WARNING
Failure to obey the following procedures could result in death or serious injury.
•
Use Limb Saw to cut only tree branches.
•
Never engage Limb Saw while people are within 50 ft. of it.
•
Never use Limb Saw indoors.
•
Always wear gloves when handling Limb Saw.
OPERATING POSITION:
1.
Remove pin which holds saw arm against mast.
2.
Make certain your tilt cylinder is rotated back in order that saw arm can open and extend without making
contact with the ground.
3. Lift saw arm upward till holes of bracket and top of spring are aligned. Insert pin and secure with hairpin.
- 8 -
