INTRODUCTION
Thank you for purchasing your new
SPARTAN EQUIPMENT Limb
Saw. Your Limb Saw was designed for trimming the
hard to reach places from the comfort of your tractor or skidsteer. It was carefully designed and manufactured to give you
many years of dependable service. Only minor maintenance, such as cleaning, sharpening and lubricating, is required to
keep it in top working condition. You or any other person, who will be assembling, operating, maintaining or working with
this product, are required to read and completely understand the information and instructions contained in this manual. If
anyone does not fully understand every part of this manual, please obtain further assistance by contacting the dealer
from which this product was purchased or by contacting SPARTAN EQUIPMENT at the telephone number or address
listed on the previous page of this manual. Keep this manual available for reference whenever this product is being
handled or used. Provide this manual to any new owners and/or operators.
GENERAL INFORMATION
The purpose of this manual is to assist you in safely assembling, mounting, operating and maintaining your Limb Saw.
Read this manual carefully to obtain valuable information and instructions that will help you achieve safe and
dependable service. The illustrations and data used in this manual were current at the time of printing, but due to
possible engineering and/or production changes, this product may vary slightly in detail. SPARTAN EQUIPMENT
reserves the right to redesign and/or change components as necessary without notification.
Throughout this manual, references may be made to:
Power Unit
The engine-driven machine to which this product must be attached.
Right, Left, Front,
Directions which are determined in relation to the operator of the equipment when seated in the
Rear
normal operating position.
IMPORTANT
Precautions that must be followed to prevent damage to equipment.
NOTICE
Precautions that must be followed to prevent substandard performance.
SERIAL NUMBER LOCATION
Always refer to the model and serial number when ordering parts or requesting information from your dealer. The
serial number plate for this product is located on the upper right corner of your Limb Saw frame.
Serial Number:
Serial Number Sticker
- 2-
