19
DIST (DISTANCE):
Displays the cumulative distance travelled during workout.
You may also pre-set target distance in STOP mode before training. To set DISTANCE
press the MODE button until the screen displays DIST. Press the SET button to change the
distance. Press the RESET button to clear the target distance to zero. The pre-set target
distance range is from 0.00 to 99.50 km.. Once you pre-set target distance and then start
to exercise, distance starts counting down from pre-set target distance to 0.00. When the
pre-set target distance counts down to 0.00, distance will start to count up immediately and
the computer will begin beeping to remind you.
CAL (CALORIES):
Displays approximate amount of calories burned during workout.
You may also pre-set target calories in STOP mode before training. To set CALORIES
press the MODE button until the screen displays CAL. Press the SET button to change the
calories. Press the RESET button to clear the target calories to zero. The pre-set target
calories range is from 0.0 to 999.0 calories. Once you pre-set target calories and then start
to exercise, calories start counting down from pre-set target calories to 0.0. When the
pre-set target calories count down to 0.0, calories will start to count up immediately and the
computer will begin beeping to remind you. (This data is a rough guide for comparison of
different exercise sessions and should not be used in medical treatment).
ODO (ODOMETER):
Displays the total accumulative distance travelled. The ODOMETER
data values can not be reset to zero by pressing and holding the MODE or RESET button for
3 seconds. If you take out the batteries from the computer, the ODOMETER data values
will reset to zero.
(PULSE):
Displays your current heart rate figures after you grip the handlebar sensors
with both your hands during exercise. To ensure the pulse read-out is more precise, please
always hold on to the handlebar grip sensors with two hands instead of only one hand when
testing your heart rate figures. You may also pre-set target heart rate in STOP mode before
training. To set PULSE press the MODE button until the screen displays
symbol.
Press the SET button to pre-set target heart rate. Press the RESET button to clear the
target heart rate to zero. Once you pre-set a target heart rate and then start to exercise,
please grip the handlebar sensors with both your hands during exercise. If the heart rate
detected is greater than the target heart rate, the computer will begin beeping to alert you.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer.
2. Place two size AA batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are in proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appears, remove batteries and wait 15
seconds before reinstalling.
Summary of Contents for Magnetic 800
Page 7: ...6 EXPLODED VIEW ...
