18
OPERATING THE COMPUTER
USING YOUR COMPUTER
The computer can be activated by pressing one of the three buttons or by pedaling. If you
leave the equipment idle for 4 minutes, the power will turn off automatically.
BUTTON FUNCTIONS:
MODE:
Press the MODE button to select the functions of the computer.
Press and hold the MODE button for 3 seconds to reset all data values to zero except the
ODO (ODOMETER) data values.
SET:
Press the SET button to set data values of TIME, DIST (DISTANCE), CAL
(CALORIES), or PULSE for target pre-setting.
RESET:
Press the RESET button to reset data values of TIME, DIST (DISTANCE), or CAL
(CALORIES) to zero.
Press the RESET button to reset data values of TIME, DIST (DISTANCE), CAL (CALORIES),
or PULSE to zero for target pre-setting.
COMPUTER FUNCTIONS:
SCAN:
Press the MODE button until the screen displays SCAN, the computer will
automatically scan each function in sequence with change every 6 seconds.
TIME:
Displays your elapsed workout time in minutes and seconds.
You may also pre-set target time in STOP mode before training. To set TIME press the
MODE button until the screen displays TIME. Press the SET button to change the time,
each time you press the SET button time should change by 1 minute. Press the RESET
button to clear the target time to zero. The pre-set target time range is from 0:00 to 99:00
minutes. Once you pre-set target time and then start to exercise, time starts counting down
from pre-set target time to 0:00 per 1 second backward. When the pre-set target time
counts down to 0:00, time will start to count up immediately and the computer will begin
beeping to remind you.
SPEED:
Displays the current training speed.
Summary of Contents for Magnetic 800
Page 7: ...6 EXPLODED VIEW ...
