16
STEP 15
A.
Insert the Hand Pulse Sensor Wires (49) through into the hole on the Handlebar Post (7)
and pull them out from the top end of the Handlebar Post (7).
B.
Place the Handlebar (8) through clamp on the Handlebar Post (7) with hand pulse
sensors facing the seat.
C.
Hold the Handlebar (8) in desired position and fasten Clamp Cover (56), Spacer (57),
and Handlebar T-Knob (64) onto clamp. Tighten the Handlebar T-Knob (64) after
adjustment.
NOTE:
Handlebar T-Knob should be tightly secured before using.
STEP 16
Remove four Cross Recessed Pan Head Bolts (42) from the Computer (62). Remove bolts
with the Multi Hex Tool with Phillips Screwdriver provided.
A.
B.
C.
Summary of Contents for Magnetic 800
Page 7: ...6 EXPLODED VIEW ...
